Startcore Kenya

5 Waterproofing solution you must consider!

By -
Image
Why should you use waterproofing solution? Nothing is annoying as having a house that is damp and leaking water from wall side and floor. Let’s go through 5 important types waterproofing solution that you will need to consider before when trying and decide what to use.   Cementitious Waterproofing. Liquid Waterproofing Membrane. Bituminous Coating Waterproofing. Bituminous Membrane Waterproofing. Polyurethane Liquid Membrane Waterproofing. Above methods are the mainly used in construction industry for the purpose of waterproofing solution. What your contractor used must be one of the above methods. So, let’s get you versed before your contractor throws around the above terms as technical. Cementitious Waterproofing This is the simplest approach since the components are readily accessible from masonry component manufacturers. Furthermore, they are simple to blend and apply in internal wet areas such as toilets. That being said, sin...
Post a Comment

What is Epoxy chemical anchors?

By -

 


Why must you use chemical anchors?

Chemical anchoring has more versatility than mechanical anchoring when it comes to fastening to concrete and other related substrates.



A mechanical anchor is placed into the concrete and expands as it is tightened, such as a C920 AkFix Master Solution, wedge anchor, or drop-in anchor. The anchor grips the hole’s wall and provides a very tighter grip as a result of this expansion.

How should you use a chemical anchor?


Chemical anchoring involves injecting a resin into the hole before inserting the stud. As a result, the chemical fills in all defects and seals the hole, making it airtight and waterproof with 100 percent adhesion.
Mechanical anchors have their own load capacity limits for each predetermined size — length (embedment) and diameter.

Chemical anchors allow for nearly infinite embedment depth, allowing you to insert any size of rod into the hole to maximize yield strength. You can also improve load capacity by using a larger-diameter hole with a thicker rod.

The non-expanding aspect of a chemically-held rod eliminates the possibility of surrounding concrete cracking significantly. This is ideal for holding railings at the edge of a cliff, concrete steps, and other similar applications.

Lastly, chemicals are anchored to enable you to adapt slightly to the axis of the club during the working time of chemicals, whereas any time a mechanical anchor has to be dug millimeter-perfectly to right the angle and level and, if not, cannot be used.



The downside of Chemical anchors.


The main drawback to some contractors of chemical anchors is that they are harder to install, and incorrect installation habits can threaten the ability of the anchors. AkFix Master solution C920 does provide information and coaching in this following proper installation methods are critical. They can also be seen as more costly than mechanical anchors. But apples in this instance should be especially in comparison to apples, since the two fasteners are often used to meet very different needs of engineers. Seek advice on this, if the question of what to choose is ever uncertain.

Where do yo get Chemical anchor In Kenya?


Visit our store: Startcore Ventures Limited and check out our catalogue for Akfix product and pricing.
Location: Kenya

Comments

Post a Comment

Popular posts from this blog

What Construction Chemicals Are You Using?

By -
Image
Technology has rapidly changed over the years from the time when mud and water were the only mixtures used to build to where we have an array of admixtures chemicals, solvents and sealants chemicals in use. Therefore, what are the available construction chemicals that one can use from foundation to finish? According to a building contractor, he/she decides what can be used for your building and you may have less control because he is believed to be the expert in what they do. But, have you ever asked your self what is needed? Let's start with the foundation all the way up. Foundation Stage Weatherproofing solvents After digging a foundation, you must treat your foundation just in case the area you are building is either prone to water damage and dampness. Weatherproof chemical protects the structure of the building. Examples are Waterproofing chemicals and specialized admixtures for cement. Companies that deal with these types of chemicals and are in Kenya are AkFix master solut...
Read more

What are uses of Polyurethane Foam in construction project?

By -
Image
What is Polyurethane Foam? Polyurethane Foam According to EuroPUR a standardization and certification of different types of PUR based in Belgium, Polyurethane Foam can be simplified as a chemical reaction of polyols and diisocyanates. The two are the product extrapolated of crude oils. Different types of additives are used to come up with high-quality products and depending on what is going to be used. There are three types of PU Foam in the Kenyan market namely multipurpose PU foam, fire-rated PU Foam and Thermal and acoustic PU foam. The packaging size commonly that you will find is 750ml or 300ml in a box of twelve. In Kenya, Polyurethane Foam has not been in use for long and more often you will come across hardware shops and construction site that still do not see the use of stocking or using it. Before Polyurethane Foam was in the Kenyan market were introduced, cement was the most commonly used in place of PU Foam.  In recent years, more and more hardware shops have started s...
Read more